Technical Specifications
Product Name: DIVE VERTICAL
Type: Vertical inflatable hyperbaric chamber
Operating Pressure: Factory set to 1.3 ATA (Atmospheres Absolutas) or 4.4 PSI. This is indicated by the blue section on the gauge and the blue pressure relief valves.
Safety Features:
Pressure Relief Valves:
Two (2) primary pressure relief valves with blue circles. One located on top of the chamber, the other above the window. Factory calibrated to equalize pressure at 1.3 ATA / 4.4 PSI.
One (1) safety backup pressure relief valve with a yellow circle, located on top of the chamber, set to open at a slightly higher pressure than the blue valves.
Zipper System:
Internal airtight zipper.
External mechanical zipper, secured by pulling the zipper string through a white safety strap.
Buckles along the zipper line (likely 4, as seen in vertical orientation images) to reduce stress and ensure a secure seal. Buckles must be fastened before zipping and during operation.
Failed Circuit Alarm: Alerts the user to a power outage. Requires a 9V battery and is plugged into the wall outlet (not an outlet controlled by a light switch).
Air Supply & Connection:
Two (2) compressors (as pictured in "What is Included" and inflation steps).
Fill Valves (x2): Located on the chamber (likely on the back/side) for connecting compressor hoses (quick connect with O-ring, silicone lubricant recommended).
Monitoring & Ports:
External Color-Coded Gauge: Needle indicates internal pressure; blue area for full operational pressure (1.3 ATA). Accurate to +/- 5%.
Internal Gauge: Operates similarly to the external gauge, with the needle moving counter-clockwise.
Red Deflation Valve (Red Knob): Operable from inside or out, used to depressurize the chamber. Turns in either direction to release air and control deflation speed. Can also be used during pressurization for ear comfort. Must be in the closed position for inflation.
Auxiliary Port: Located to the left of the red deflation valve, for attaching the small auxiliary valve.
Structure & Setup:
Floor System: A circular floor cover with a "This Side Up" indication and (likely 8) buckles for attaching to the base of the chamber.
Internal Frame: Consists of 12 pieces total: 6 arches (forming 2 rings) and 6 small side poles (forming 3 long poles). Assembled inside the chamber on top of the carpet using a provided screwdriver.
Interior:
Carpet: Oval/round carpet placed inside the chamber, under the internal frame.
Compressor Type: Oil-less 80/120 with a flow rate of 80 to 160 liters per minute and a max operating pressure of 6 PSI.
